Free worldwide shiping on $150+
Let’s take a look at: Please keep in mind that I’m going to launch an online store here, at makerspet.com, sometime in 2024, offering robot hardware kits. That said, you can always get all parts directly elsewhere. I’ve upgraded the…
Loki (200mm), Fido (250mm), and Snoopy (300mm) are getting a sense of touch – for petting! All it takes is a few lines of #Arduino #ESP32 code and a piece of sticky copper tape – or simply wire. Here is…
Watch Snoopy the pet robot map the house and navigate around the house using the newly-created map.This is a fraction of what your robot will be able to do. The full step-by-step tutorial is here. Snoopy maps the house Disclaimer…
Here is a step-by-step tutorial creating a map of the room and navigating around the room using the newly-created map in real time. I’m using here a Windows PC running ROS2 in a Docker container. You can use a Linux…
Here are reels demonstrating a Kaia.ai home robot self-driving around the living room, creating a map of the room and navigating the room – all automatically. I have sped up the videos 4x. Demo: Snoopy self-drives, maps a living room…
Watch Snoopy-the-pet-robot self-drive around a simulated living room, hide under the table (as in hide-and-seek), play ball and “prompt” humans to play.I sped up the videos 4x. This is fraction of what your robot will be able to do. The…
Here is a step-by-step tutorial simulating Snoopy home robot in 3D VR using the Gazebo ROS2 simulator. I’m using here a Windows PC running ROS2 in a Docker container. You can use a Linux PC running Docker as well. If…
Here is a step-by-step tutorial creating a map of the room and navigating around the room using the newly-created map. The simulation runs in ROS2 Gazebo. I’m using here a Windows PC running ROS2 in a Docker container. You can…
Snoopy’s hardware bill of materials adds up to around $200. Here is the minimum BoM breakdown! Let’s add up part costs as of 09 You can get these parts, for example, on Amazon or AliExpress. Part Quantity Approx. Cost per…
Meet Snoopy, an open-source pet robot! Snoopy is a 300mm, round-base, mid-size DIY 3D-printable indoor pet robot compatible with Kaia.ai software platform. Snoopy was designed in Fusion 360 in 05/2023 and printed using a Voron 2.4r2 350mm. Once finished, Snoopy…
Questions about a kit, an order, or your build? Drop us a note — we usually reply within a day.