Free worldwide shiping on $150+
Here is how I made rubberized rollers for my omniwheel home robot. I’ve tried three or more overmolding techniques and concluded that applying urethane rubber overmolding to omniwheel rollers has produced – in my opinion – hands-down best performing and…
This is a 12-roller robot 3D-printed DIY omni-wheel – a part of Kiddo companion robot. This open-source design incudes 3MF, STL, STEP and SolidWorks files. Included are 3 versions – as the omni-wheel design evolved: 1. Rollers coated in urethane…
If you are reading this post, chances are you have some trouble scraping plastic – of even removing entire 3D-printed parts – off the build surface. There is a bit of a know-how to this chore – here is how…
Once you have made your airtight filament spool container – as described in this post – let’s take care of two more things: Fill the airtight filament spool container with desiccant. Put a hygrometer-and-thermometer combo into the container. Pop quiz…
If you 3D-print PLA only, I don’t think you need a dryer. But if you print just about anything else – PETG, ABS, ASA, Nylon, TPU, polycarbonate and so on – keep reading! Most 3D printing filaments, except PLA, are…
If you print only PLA filament, I don’t think you need any of this “nonsense”. Otherwise, if you print just about everything else including PETG, ABS, ASA, Nylon, TPU, polycarbonate and so on – read on! Most 3d printing filaments,…
Now that you have assembled your Voron printer, did you know that you can get a serial number from Voron Design for your 3D printer? I’ve gotten mine: V2.5212. Here is how you can request and obtain your serial number:…
When searching for a Voron 2.4 nozzle brush mod I noticed that the available mods stick up from the bed high enough to interfere with the extruder’s movement – when the extruder moves at the very back of the bed,…
I use this mount for my Voron 2.4. This mount fits many common webcams – specifically, those webcams that have a horizontal tube-like hole in the back. Here are build instructions and 3MF/STL files. I have included the Autodesk Fusion…
Voron 2.4 print volume height comes up short of the advertised 350mm (or 300mm, 250mm) – quite a bit – especially when using the StealthBurner extruder and/or PTFE filament tubing. Here is a “top hat” volume height extension that you…