Free worldwide shiping on $150+
Breakout Cable for N20 Encoder Motors
$1.49
JST ZH 6-pin breakout pigtail cable
40 in stock
6-pin breakout pigtail cable for popular N20 motors equipped with an encoder.
Recommended use:
- Connect N20 encoder motor to Maker’s Pet boards with integrated brushed DC motor drivers (BDC-30P, BDC-38C4)
- Connect N20 encoder motor to board screw and/or spring terminals
Technical Details:
- JST ZH compatible male connector, 1.5mm pitch, 6-pin
- Approx. 15cm length, 26 AWG wire
- Tinned leads
- Weight approx. 1.7g
- Connector datasheet, ZHR-6 housing
Warnings:
- This product contains small parts. Keep away from small children.
| Weight | 0.01 lbs |
|---|---|
| Dimensions | 2 × 2 × 0.25 in |
Be the first to review “Breakout Cable for N20 Encoder Motors”
You may also like…
-
Driver Board for ESP32-DOIT-DevKit-V1, Brushed DC Motors and LiDAR
$35.00 -
N20 Encoder Motor 12V 200RPM
$10.00 -
TB6612FNG Motor Driver Breakout Board
Price range: $3.50 through $4.50Select options This product has multiple variants. The options may be chosen on the product page -
Driver Board for ESP32-DevKitC-V4, Brushed DC Motors and LiDAR
$35.00
Reviews
There are no reviews yet.