Free worldwide shiping on $150+
Loki (200mm), Fido (250mm), and Snoopy (300mm) are getting a sense of touch – for petting! All it takes is a few lines of #Arduino #ESP32 code and a piece of sticky copper tape – or simply wire. Here is…
Snoopy’s hardware bill of materials adds up to around $200. Here is the minimum BoM breakdown! Let’s add up part costs as of 09 You can get these parts, for example, on Amazon or AliExpress. Part Quantity Approx. Cost per…
Meet Snoopy, an open-source pet robot! Snoopy is a 300mm, round-base, mid-size DIY 3D-printable indoor pet robot compatible with Kaia.ai software platform. Snoopy was designed in Fusion 360 in 05/2023 and printed using a Voron 2.4r2 350mm. Once finished, Snoopy…