Category 3D Printing

Voron 2.4 ‘Crash-Free’ Nozzle Brush

When searching for a Voron 2.4 nozzle brush mod I noticed that the available mods stick up from the bed high enough to interfere with the extruder’s movement – when the extruder moves at the very back of the bed,…

Voron 2.4 top-hat mod

Voron 2.4 print volume height comes up short of the advertised 350mm (or 300mm, 250mm) – quite a bit – especially when using the StealthBurner extruder and/or PTFE filament tubing. Here is a “top hat” volume height extension that you…