Breakout Cable for YDLIDAR X2, X2L, X3, X3 PRO, SCL

4-pin cable with 2.54mm DuPont female leads for the following LiDARs

• YDLIDAR X3, X3 PRO
• YDLIDAR X2, X2L
• YDLIDAR SCL

Recommend for use with

• Maker’s Pet motor driver and ESP32 breakout boards BDC-30P and BDC-38C4
• YDLIDAR X3, X3 PRO, X2 and X2L as a breakout cable
  • Connect to 2.54mm male headers on various Arduino boards
  • Connect to 2.54mm male headers on ESP32, Raspberry Pi, Raspberry Pi Pico and other MCU/CPU modules

Technical Details

• Molex PicoBlade 4-pin compatible connector, 1.25mm pitch
• 20cm length, 28 AWG wire
• Individual DuPont 2.54mm pitch female leads
• Weight approx. 1.7g 20cm.
• Molex PicoBlade product specification

Warnings:

• This product contains small parts. Keep away from small children