Board Cable for LDROBOT LD14P LiDAR

4-pin 10-cm cable for LDROBOT LD14P LiDAR with JST GH-compatible connectors on both ends.

Technical Details

• JST GH compatible male connectors on both ends, 1.25mm pitch
  • “Same” wiring, i.e. pin 1 connects to pin 4 on the opposite side, etc.
• Approx. 10cm length; 28 AWG wire
• Weight approx. 0.8g
• GH connector datasheet

Warnings:

• This product contains small parts. Keep away from small children